1) the ID is absolutely part of the ecosystem, and one of the uses would be that "gateway" or local processing FPGA bitstreams are either selected from pre-compiled pool, or generated on the fly eithe

I think for now the next logical step would be to make a prototpye and send out some prototypes to the relevant parties. you can think about something to a certain extent, but then you need to touch h

would be great to have a design to download. ed

Is a widely used system with lots of modules. https://www.mikroe.com/click

I suggest to have a google Doc document (written and made available by Antti) where people can add their comments to the standard document. ed

Greg added this high speed connector to his Feather, but I dont know if it would be possible to wire it up to the adapter. https://twitter.com/GregDavill/status/115180597056299417670562994176

MIPI-CSI (RASPI cam?) MIPI-DSI HS-1 GiG Ethernet LS-parallel camera HS-JESD204B AD HS-JESD204B DA LS-parallel transceiver (SX1257 PMOD)

How about designing a carrierboard with this module https://shop.trenz-electronic.de/de/TE0713-02-200-2C-FPGA-Modul-mit-Xilinx-Artix-7-XC7A200T-2FBG484C-4-x-5-cm-1-GByte-DDR3L?c=457 and some cruvi int

To ease transition, a cruvi2PMOD adapter would be needed.

https://www.sparkfun.com/qwiic https://www.crowdsupply.com/steiert-solutions/qwiikit

You want to have a pressfit distance so that you can screwmount the modules. Also on the carrier board you want to have "Muttern" oressfitted into it to ease the mounting. Very much like M.2 mounting

This way mounting modules is much more robust than PMOD. Edmund Humenberger <edmund@...> schrieb am So., 21. Juli 2019, 16:23:

Is the HS interface capable for M.2? Ed

HDMI out HDMI in

Cruvi Verlängerungskabel between carrier and module (Up to how long?) Cruvi connector cable between two carrier boards to connect two FPGA boards.

I need a solution with several interfaces. I buy a carrier board with enough cruvi slots and I buy all the different cruvi modules I need. I plug in all cruvi modules into the carrier board and switch

When system-designers design a solution, they care about the complete solution. In automation, that would be the whole machine. The design tool would hold the model of the whole machine, and all its m

More infos about the proposed standard

Klick modules are 25.4 mm wide http://blog.ljcv.net/2018/08/mikroelektronika-mikrobus-and-click.html Cruvi boards are only 22mm wide. So Klick boards would not fit on cruvi boards. This is a problem.

I think this displays are a good option for the start. https://riverdi.com/technologies/ribus/ https://www.mikroe.com/ribus-click