https://github.com/micro-FPGA/CRUVI/blob/master/docs/CRUVI_Specification.pdf updated spec available!

www.cruvi.com website is alive, currently mostly only to forward to github for file access, including the specification document.

adapters to-from UEXT are planned, they are "wires only" eco system adapters to-from CRUVI LS connector

nice, that could be set as long term goal, but full 100% plug and play is not set as ultimate target, so it may take a while.. Some comments: when the carrier wakes up, then either SoC (if hard CPU pa

https://github.com/micro-FPGA/CRUVI/tree/master/ecosystem partial list of some planned adapters updated in github, there are several more planned but please also add your wishlist :)

yees -> kind of idea is/was a EUROCARD template: 3 + 3 cruvi slots (back + front) SPACE for "brain" in the middle fits some existing enclosure for eurocards "some" connector front - RJ45 gBe ? power c

https://docs.google.com/spreadsheets/d/1dKAiwvI3NWGZzw_dij6I-t_KGuxpKrdJGuAo-tG4v04/edit?usp=sharing adding modules there there are some "compromises" and caveats that well, we should document somewhe

This is something I did look into for long time, we use the "solder down" spacers in some stuff, and press-fit could also be an option, but There are some constraints why I pretty much excluded those:

yes, in the HS connector there is one dedicated TRANSCEIVER lane, and USB has also dedicated pins (reserved) and - M2 connector fits onto single wide CRUVI module ! so at least theoretically it should

indeed :) this adapter was done during early feasibility study This is just 1:1 adapter fully passive, it is a bit speial as the PMOD connector will be lying flat on the BASEBOARD, and any connected P

its on the TODO list already, I have latest KiCad installed too, and reading about kicad library standard.. plan is that all eagle-kicad project that are open source should link to cadlab.io for easy

its on the bottom :) https://www.digikey.com.au/product-detail/en/hirose-electric-co-ltd/DF12-30DS-0.5V-86/H5215CT-ND/948728 well, gregs feather could be converted to cruvi using this connector.. its

yes, I probably should have made the doc in google in the first place, right now it is in the office format https://drive.google.com/drive/folders/1z91rHqIBLRua9_ioNj3Ma6OR9cHTjNSx?usp=sharing There i

I2C, RX/TX, SCK,MISO,MOSI - map 1:1, but to where connect SPI select on feather? or have lots of solder jumpers? This adapter if done "full passive" would be really easy to-do, and it would allow also

so true - you actually have to have it "in your hands" ... doing schematic and and looking PCB in 3D is not sufficient. lots of designs for first hardware "round" are being prepared already, but we sh

yes, this one of the first "ecosystem" adapters to be targeted: There are possible at least 4 adapters for Click-to-CRUVI needed 1) S size PASSIVE to CRUVI LS this is just wired, it maps very well, SP

so the concept so far: 1) all modules with the high speed connector fitted are pretty much forced to include ID EEPROM, also the I2C bus on the HS connector is really pretty much mandatory as well. 2)