Olimex does not have that many modules, but some very intereting ones. I2c SPI and Serial Cruvi interface board to UEXT https://www.olimex.com/Products/Modules/UEXT/

https://www.digikey.at/product-detail/de/mikroelektronika/MIKROE-2882/1471-1949-ND/8545542

As the Klickboards are too wide to be put directly on a CRUVI board, A cruvi board should be made which allows to connect KlickBoards via the adapter which is made available anyway So we only would ne

I think this displays are a good option for the start. https://riverdi.com/technologies/ribus/ https://www.mikroe.com/ribus-click

Klick modules are 25.4 mm wide http://blog.ljcv.net/2018/08/mikroelektronika-mikrobus-and-click.html Cruvi boards are only 22mm wide. So Klick boards would not fit on cruvi boards. This is a problem.

More infos about the proposed standard

When system-designers design a solution, they care about the complete solution. In automation, that would be the whole machine. The design tool would hold the model of the whole machine, and all its m

I need a solution with several interfaces. I buy a carrier board with enough cruvi slots and I buy all the different cruvi modules I need. I plug in all cruvi modules into the carrier board and switch

Cruvi Verlängerungskabel between carrier and module (Up to how long?) Cruvi connector cable between two carrier boards to connect two FPGA boards.

HDMI out HDMI in

Is the HS interface capable for M.2? Ed

This way mounting modules is much more robust than PMOD. Edmund Humenberger <edmund@...> schrieb am So., 21. Juli 2019, 16:23:

You want to have a pressfit distance so that you can screwmount the modules. Also on the carrier board you want to have "Muttern" oressfitted into it to ease the mounting. Very much like M.2 mounting

https://www.sparkfun.com/qwiic https://www.crowdsupply.com/steiert-solutions/qwiikit

To ease transition, a cruvi2PMOD adapter would be needed.

How about designing a carrierboard with this module https://shop.trenz-electronic.de/de/TE0713-02-200-2C-FPGA-Modul-mit-Xilinx-Artix-7-XC7A200T-2FBG484C-4-x-5-cm-1-GByte-DDR3L?c=457 and some cruvi int

MIPI-CSI (RASPI cam?) MIPI-DSI HS-1 GiG Ethernet LS-parallel camera HS-JESD204B AD HS-JESD204B DA LS-parallel transceiver (SX1257 PMOD)

Greg added this high speed connector to his Feather, but I dont know if it would be possible to wire it up to the adapter. https://twitter.com/GregDavill/status/115180597056299417670562994176

I suggest to have a google Doc document (written and made available by Antti) where people can add their comments to the standard document. ed

Is a widely used system with lots of modules. https://www.mikroe.com/click